RIDGID Pipe Threader
FeaturesThreads 1/4"-2" pipe at 36 RPM and 2 1/2"-4" at 12 RPM.
The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
An induction motor insures sound levels well within the limits set by the regulating authorities.
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
Constant and proper lubrication of dies and workpiece with through-head oiling.
CSA approved.
Approved to UL standards (NRTLC).
Specifications
Pipe Capacity: 1/4"-4" (6mm-100mm) 4"-6" (100mm-150mm) with 161 Geared Threader.
Bolt Capacity: 1/4"-2" (6mm-50mm).
Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction type.
Motor Control: Reverse/Off/Forward, heavy-duty rotary-type and integral foot switch.
Spindle Speed: 36/12 RPM.
Gear Box: Two-speed gear box 3:1 ratio.
Chuck: Hammer-type with replaceable rocker-action jaw inserts.
Rear Centering Device: Cam action.
Cutter: Model 764 full-floating, self-centering 1/4"-4" with F-229 cutter wheel.
Reamer: Model 744, 1/4"-4" blade-type.
Oiling:
Pump: Self-priming, gerotor-type, automatic-reversing, constant-flow.
| RIDGID REAMER 1224 PIPE THREADER 2-1 2 - 4" 714 711 NR
$109.99 
Time Left: 12h 15m | |
| NEW Ridgid 1224 Pipe Threader 1 2-4" 2 Die Heads Stand!
$6,975.00 $7,475.00
Time Left: 2d 12h 48m | |
| RECONDITIONED RIDGID 1224 PIPE THREADER RIGID 1 2" - 4"
$5,999.99 $6,299.99
Time Left: 3d 20h 19m | |
| Ridgid 1224 rigid threader pipe conduit 1" to 4" EXCLNT
$5,299.00
Time Left: 6d 16h 17m | |
| RIDGID 1224 POWERED PIPE THREADER MACHINE -TESTED WORKS
$3,499.99 $3,799.99
Time Left: 7d 16h 8m |
